• 1000D Nylon construction for durability and dirt/water/abrasion resistance
• 3L pouch (size S: 1.5L) on either side for carrying water, dog food, treats, toys, etc.
• Mesh lining for breathability to maximize function and comfort on lengthier outings
• Exterior umbrella pockets with cross-bungee cords for strapping on extra gear
• Two 2” by 7.5” (size S: 2” by 5.5”) loop panels for name patches and morale patches
• Hook-and-loop belly strap with UTX-Duraflex buckles so the pack stays in place
• Size S offers loop-surfaced webbing for holding flashlights, light sticks and other linear items
• Concealed zippers to avoid dog hair getting caught when closing the pouches
• Adjustable straps and for different dog breeds and sizes

1. Please measure your dog before placing an order!
2. OneTigris harnesses are NOT designed to bear heavy weights and we advise against relying solely on the grab handles to carry your dog.
3. When loading up pouches for a dog harness or pack, for most dogs, 10% to 12% of their body weight is a good starting point for loading up dog packs. This would be 5-6lb for a 50lb dog, or 2.5-3kg for a 25kg dog. Of course, the right amount depends on a number of factors, such as your dog's breed, physical fitness, and energy level.

• Material: 1000D Nylon, UTX Duraflex Buckles
• Dimensions:
  • Size S –
    • Neck Girth: 18”-23.5”/46cm-60cm
    • Chest Girth: 25”-30.5”/64cm-78cm
    • Back Length: 9.8”/25cm
    • Pack Size: 9”*5.1”/23cm*13cm
    • Grab Handle Width: 5.1”/13cm
    • Weight: 14.6oz/416g
  • Size M –
    • Neck Girth: 22”-31.5”/56cm-80cm
    • Chest Girth: 26.7”-37.8”/68cm-96cm
    • Back Length: 9.8”/25cm
    • Pack Size: 10”(L)*7”(W)*2”(D)/26cm*17cm*5cm
    • Umbrella Pocket Dimensions: 8”*6.6”/20.5cm*17cm
    • Grab Handle Width: Width: 5.1”/13cm
    • Weight: 16oz/456g
• Stainless Steel D-ring Pull Strength: Tested at 176lb/80kg
• UTX Duraflex® Buckle Pull Strength: Tested at 143lb/65kg
• Color: Black, Coyote Brown

• OneTigris MAMMOTH Tactical Dog Pack *1
• OneTigris Logo Patch *1

A well-fitted harness or collar should allow enough room for you to fit your two fingers between the dog's body and the harness/collar. The dog harness should be 4 cm shorter than their back length.

Once you have the measurements, you can compare them with the size chart provided by the harness manufacturer. Always round up to the nearest size if your dog's measurements fall between two sizes, and adjust the harness according to the instructions provided to ensure a secure fit.

Remember, a correctly fitted harness should be snug but not too tight, and you should be able to fit two fingers between the harness and your dog's body at any point.

Caring for pet gear like harnesses, collars, leashes, and accessories made from durable materials such as nylon, Cordura, and Multicam fabric involves a few general guidelines to ensure they last longer and remain safe for your pet. Here's a basic care instruction outline for these items:

For Nylon Products (Harnesses, Collars, Leashes):

Cleaning:

• Hand wash with mild detergent in warm water to remove dirt and odors.
• Use a soft brush to scrub away tough stains.
• Avoid bleach or other harsh chemicals that can degrade the material.
• Rinse thoroughly to remove all soap residues.

Drying:

• Air dry by hanging or laying out flat away from direct sunlight, as UV rays can weaken the fibers over time.
• Do not use a high-heat setting on a dryer, as this can melt or warp the material.

General Care:

• Inspect regularly for signs of wear and tear, especially around the buckles and adjustment points.
• Avoid excessive pulling or strain on buckles and attachment points.
• Store in a dry, cool place when not in use to prevent mildew or material degradation.

For Cordura and Multicam Fabric Items:

Cordura and Multicam fabrics are known for their durability and resistance to abrasions, tears, and scuffs.

Cleaning:

• Gently brush off any loose dirt or debris.
• Clean with a sponge or soft cloth dampened with water and, if necessary, a mild soap.
• For stubborn stains, use a soft-bristled brush to gently scrub.
• Avoid soaking these materials as it may affect the integrity of the fabric coatings.

Drying:

• Air dry by laying the item flat or hanging it up.
• Do not expose to direct heat or sunlight for extended periods.

General Care:

• Regularly inspect for damage to ensure the safety and comfort of your pet.
• Look for loose threads or abrasions that may need to be repaired.
• Avoid storing in damp or humid conditions to prevent mold or mildew.

For All Items:

Hardware Care:

• Wipe down any metal parts to prevent rust or corrosion.
• Ensure that buckles and clips function properly and are not damaged.
• Lubricate any moving parts if necessary to keep them working smoothly.

Safety Checks:

• Before each use, check for any signs of wear or damage.
• Replace the item if any part of it seems unreliable or unsafe for your pet.

Avoid:

• Dragging the gear on rough surfaces which can cause premature wear.
• Letting your pet chew on the gear, as this can cause damage that may lead to failure.

Repairs:

• If the material is torn or the stitching comes undone, consider having it professionally repaired to maintain its strength and functionality.

By following these care instructions, your pet's harnesses, collars, leashes, and accessories should remain in good condition, ensuring they are safe and comfortable for your pet to use.